Industrial Gluten-Free Tortilla Chips: Tapioca Starch Shatter-Crisp & Oil Reduction

Industrial formulation for crispy gluten-free tortilla chips with ARCO Tapioca Starch. Low oil uptake, superior dip strength, and exceptional shatter crunch.

Industrial Gluten-Free Tortilla Chips: Tapioca Starch Shatter-Crisp & Oil Reduction
Snack Food Manufacturing & Frying Commercial Bakery Formulation

Commercial industrial formulation for artisan tortilla chip and totopo manufacturers. Adding 12% ARCO Tapioca Starch to nixtamalized corn masa prevents blister blowouts, reduces frying oil absorption by 18%, and yields an unbeatable shatter-crisp crunch capable of holding heavy queso and chunky guacamole.

ARCO Food Ingredient Packaging
Key Professional Ingredient

ARCO Single-Origin Sweet Tapioca Starch 55 lb (25kg)

Non-GMO, single-origin South Brazilian tapioca imported directly for US bakeries.

Prep Time 20 mins
Cook / Bake 15 mins
Yield / Batch 100 kg Continuous Fryer Batch
Baking Temp 375°F / 190°C

Commercial Formula Ingredients

Scaled Foodservice Batch
  • Nixtamalized Stone-Ground Corn Masa Flour (Maseca)65.0 kg
  • ARCO Clean-Label Tapioca Starch (Polvilho Doce)12.0 kg
  • Native Potato Flakes / Flour5.0 kg
  • Fine Sea Salt1.2 kg
  • Warm Filtered Water (45°C / 113°F)72.0 L
  • High-Oleic Sunflower or Non-GMO Corn OilAs needed for frying
Production Method Milestone Commercial QA Checkpoint
Rheology & Thermal Gelatinization

Starch Hydration & Matrix Integrity

ARCO cassava starches provide unmatched expansion and freeze-thaw stability. Follow the exact temperature timing below for professional honeycomb aeration.

Production & Culinary Method

Masa & Starch Slurry Homogenization

Blend the corn masa flour, ARCO Tapioca Starch, potato flakes, and salt in a twin-shaft ribbon blender for 3 minutes. Stream in warm water and mix 4 minutes until a cohesive, non-sticky masa dough forms at 38°C.

Rotary Sheeting & Die-Cutting

Discharge dough into the hopper of a high-speed rotary sheeter. Pass between polished chrome rollers set to 0.95mm thickness. The die-cutting roller stamps traditional equilateral triangles (65mm edge) onto the transfer conveyor.

Three-Pass Gas Toasting (Pre-Bake Phase)

Convey cut raw chips through a three-tier gas-fired oven (temperatures: Top 380°C, Middle 320°C, Bottom 260°C) with total residence time of 32 seconds. Moisture is rapidly reduced from 48% to 24%.

Continuous Immersion Frying & Salting

Drop toasted chips immediately into continuous oil fryer at 190°C (375°F) for 55 seconds with submerged hold-down belt. Exit fryer onto de-oiling shaker screens, mist with seasoning salt in rotating coating drum, and cool.

ARCO FOOD LLC • 7420 TPC Blvd, Orlando, FL • (407) 450-5161 • info@arcofood.org